'flow velocity'

We have Electro Magnetic Flow Meters, which has Digital Readout for Flow Rate as well as Total Flow. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Meters is, the fluid passing through it must be conductive, The conductivity of the liquid must be at least 0.5 µS/Cm. These meters are also called as Magflow or, EM Flow Meters. These meters has no any moving parts in it, so these very well recommended for food grade applications like juices, milk, Municipal or, Industrial Water, etc. Because there are no moving parts in it, these meters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc. Electromagnetic Flow Meters are available in three types on the basis of their construction. : Full Bore type Electromagnetic Flow Meters, Sandwich type Electromagnetic Flow Meters and Insertion type Electromagnetic Flow Meters. Insertion type Electromagnetic Flow Meters are provided along with Hot Tab Assembly for the safty in use, ease in installation and ease in maintenance. These type of meters requires very low maintenance. Meter Sizes : DN 10 up to DN 2000 End Connections : Flanged Ends, Tri-Clover Ends, SMS type or, Wafer type. Outer Body Materials : MS or, SS Liner Materials : Soft or, Hard Rubber, PTFE, PFA or, Neoprene Electrode Material : Hastelloy C or, B, Titanium Velocity suitability : 0.5 up to 10 M/Sec.

We have Electro Magnetic Flow Transmitters, which has Digital Readout for Flow Rate and Totalized Flow along with the output of 4 to 20 mA in proportionate to the Flow Rate. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Transmitter is, the medium must have conductivity at least 0.5 µS/Cm. These Flow Transmitters are also called as Magflow or, EM Flow Transmitters. Electromagnetic Flow Transmitters has no any moving parts in it, so these very well recommended for food grade applications like juices, milk, Municipal or, Industrial Water, etc. Because there are no moving parts in it, these Transmitters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc. Electromagnetic Flow Transmitters are available in three types on the basis of their construction. : Full Bore type Electromagnetic Flow Transmitters, Sandwich type Electromagnetic Flow Transmitters and Insertion type Electromagnetic Flow Transmitters. Insertion type Electromagnetic Flow Meters are provided along with Hot Tab Assembly for the safety in use, ease in installation and ease in maintenance. These type of meters requires very low maintenance. Meter Sizes : DN 10 up to DN 2000 End Connections : Flanged Ends, Tri-Clover Ends, SMS type or, Wafer type. Outer Body Materials : MS or, SS Liner Materials : Soft or, Hard Rubber, PTFE, PFA or, Neoprene Electrode Material : Hastelloy C or, B, Titanium Velocity suitability : 0.5 up to 10 M/Sec.

Type of sensor : Insertion Paddle Wheel Service : Any clear liquids Max. % of Solids : 1% of fluid volume, non-abrasive, non-magnetic,<100 micron in dia.& length Mounted : Field Pressure drop : Less than 0.1 bar Accuracy : +/- 1% of Full Scale if velocity is more than 0.5 m/s Repeatability : +/- 0.5% Enclosure : IP 65 or, Flameproof Fitting material : ABS, SS304 or, SS316 Fitting Type : T type Welded Flanged ends Sensor Cable Length : 0.5 meters signal transmission cable Output Cable Length : Two core shielded wire - One Meter Paddle : PVDF Indicator Housing : Polycarbonate O-rings : Viton Sensor Rod : PP or, SS 316 Display : 8 X 2 alpha-numeric (Backlit) 7 digits for Total & 4 digits for rate Unit for indication : LPM, LPH, M3/Hr, USGPM Out Put : 4 to 20 mA Supply : 230 V AC +/- 15%, 50 Hz T Fitting : It is compulsory with PP or, SS Flow Sensors (Selection from TYPE OF T-FITTINGS) Line Size Selection (Water) : Min. & Max. Flow Rates NB MINIMUM M3/HR MAXIMUM M3/HR 15 0.2 2.1 25 0.8 8 40 1.9 19 50 3.5 35 65 5.8 58 80 7.5 75 100 14 140 125: 5' 22 220 150: 6' 32 320 175: 7' 45 450 200: 8' 56 560 225: 9' 71 710 250: 10' 88 880 275: 11' 106 1060 300:12' 126 1260 325:13' 148 1480 350:14' 172 1720 375:15' 197 1970 400:16' 224 2240

Type of sensor : Insertion Paddle Wheel Service : Any clear liquids Max. % of Solids : 1% of fluid volume, non-abrasive, non-magnetic,<100 micron in dia.& length Mounted : Field Pressure drop : Less than 0.1 bar Accuracy : +/- 1% of Full Scale if velocity is more than 0.5 m/s Repeatability : +/- 0.5% Enclosure : IP 65 or, Flameproof Fitting material : ABS, SS304 or, SS316 Fitting Type : T type Welded Flanged ends Sensor Cable Length : 0.5 meters signal transmission cable Output Cable Length : Two core shielded wire - One Meter Paddle : PVDF Indicator Housing : Polycarbonate O-rings : Viton Sensor Rod : PP or, SS 316 Display : 8 X 2 alpha-numeric (Backlit) 7 digits for Total & 4 digits for rate Unit for indication : LPM, LPH, M3/Hr, USGPM Out Put : 4 to 20 mA Supply : 230 V AC +/- 15%, 50 Hz T Fitting : It is compulsory with PP or, SS Flow Sensors (Selection from TYPE OF T-FITTINGS) Line Size Selection (Water) : Min. & Max. Flow Rates NB MINIMUM M3/HR MAXIMUM M3/HR 15 0.2 2.1 25 0.8 8 40 1.9 19 50 3.5 35 65 5.8 58 80 7.5 75 100 14 140 125: 5' 22 220 150: 6' 32 320 175: 7' 45 450 200: 8' 56 560 225: 9' 71 710 250: 10' 88 880 275: 11' 106 1060 300:12' 126 1260 325:13' 148 1480 350:14' 172 1720 375:15' 197 1970 400:16' 224 2240

Type of sensor : Insertion Paddle Wheel Service : Any clear liquids Max. % of Solids : 1% of fluid volume, non-abrasive, non-magnetic,<100 micron in dia.& length Mounted : Field Pressure drop : Less than 0.1 bar Accuracy : +/- 1% of Full Scale if velocity is more than 0.5 m/s Repeatability : +/- 0.5% Enclosure : IP 65 or, Flameproof Fitting material : ABS, SS304 or, SS316 Fitting Type : T type Welded Flanged ends Sensor Cable Length : 0.5 meters signal transmission cable Output Cable Length : Two core shielded wire - One Meter Paddle : PVDF Indicator Housing : Polycarbonate O-rings : Viton Sensor Rod : PP or, SS 316 Display : 8 X 2 alpha-numeric (Backlit) 7 digits for Total & 4 digits for rate Unit for indication : LPM, LPH, M3/Hr, USGPM Out Put : 4 to 20 mA Supply : 230 V AC +/- 15%, 50 Hz T Fitting : It is compulsory with PP or, SS Flow Sensors (Selection from TYPE OF T-FITTINGS) Line Size Selection (Water) : Min. & Max. Flow Rates NB MINIMUM M3/HR MAXIMUM M3/HR 15 0.2 2.1 25 0.8 8 40 1.9 19 50 3.5 35 65 5.8 58 80 7.5 75 100 14 140 125: 5' 22 220 150: 6' 32 320 175: 7' 45 450 200: 8' 56 560 225: 9' 71 710 250: 10' 88 880 275: 11' 106 1060 300:12' 126 1260 325:13' 148 1480 350:14' 172 1720 375:15' 197 1970 400:16' 224 2240

Type of sensor : Insertion Paddle Wheel Service : Any clear liquids Max. % of Solids : 1% of fluid volume, non-abrasive, non-magnetic,<100 micron in dia.& length Mounted : Field Pressure drop : Less than 0.1 bar Accuracy : +/- 1% of Full Scale if velocity is more than 0.5 m/s Repeatability : +/- 0.5% Enclosure : IP 65 or, Flameproof Fitting material : ABS, SS304 or, SS316 Fitting Type : T type Welded Flanged ends Sensor Cable Length : 0.5 meters signal transmission cable Output Cable Length : Two core shielded wire - One Meter Paddle : PVDF Indicator Housing : Polycarbonate O-rings : Viton Sensor Rod : PP or, SS 316 Display : 8 X 2 alpha-numeric (Backlit) 7 digits for Total & 4 digits for rate Unit for indication : LPM, LPH, M3/Hr, USGPM Out Put : 4 to 20 mA Supply : 230 V AC +/- 15%, 50 Hz T Fitting : It is compulsory with PP or, SS Flow Sensors (Selection from TYPE OF T-FITTINGS) Line Size Selection (Water) : Min. & Max. Flow Rates NB MINIMUM M3/HR MAXIMUM M3/HR 15 0.2 2.1 25 0.8 8 40 1.9 19 50 3.5 35 65 5.8 58 80 7.5 75 100 14 140 125: 5' 22 220 150: 6' 32 320 175: 7' 45 450 200: 8' 56 560 225: 9' 71 710 250: 10' 88 880 275: 11' 106 1060 300:12' 126 1260 325:13' 148 1480 350:14' 172 1720 375:15' 197 1970 400:16' 224 2240

The KOFLOC 8700 Series Mass Flow Controller is a versatile device designed for precise gas flow measurement and control, featuring an integrated LCD display for real-time monitoring

There are various accessories required for Flow Measuring and Control Instruments. For Flow Sensors, Flow Meters and Flow Switches.For Insertion Paddle type Flow Sensors and Meters various types of T fittings are essential for their best performance, which we provide in Industrial PVC, SS304 or, in SS316 material.For Flow Switches various types of T fittings may be required with either threaded or flanged end type.For Electromagnetic Flow Meters suitable earth ring will be require

There are various accessories required for Flow Measuring and Control Instruments. For Flow Sensors, Flow Meters and Flow Switches.For Insertion Paddle type Flow Sensors and Meters various types of T fittings are essential for their best performance, which we provide in Industrial PVC, SS304 or, in SS316 material.For Flow Switches various types of T fittings may be required with either threaded or flanged end type.For Electromagnetic Flow Meters suitable earth ring will be require