ORP Indicator with Electrode

An ORP (Oxidation-Reduction Potential) indicator with electrode is a device used to measure the cleanliness or oxidizing/reducing power of a solution. It's commonly used in water treatment, aquariums, pools, hydroponics, and laboratories to assess chemical reactions and water quality.

Send Message

DO2 Instruments-Electrode

DO2 Sensors

Dissolved Oxygen (DO) sensors, often referred to as DO2 sensors, are used to measure the amount of oxygen dissolved in a liquid, typically water. These sensors are vital in various industries, including environmental monitoring, wastewater treatment, aquaculture, and brewing. Here's a quick breakdown:

Send Message

DO2 Instruments-Electrode

Do2 Electrode

A DO₂ electrode (or DO sensor) measures the amount of dissolved oxygen in a liquid, commonly in: Bioreactors (pharma, fermentation) Water/wastewater treatment Aquaculture Environmental monitoring

Send Message

DO2 Instruments-Electrode

TC end connection

Do2 Electrode - TC end connection

Send Message

DO2 Instruments.

Indicating Controller with Electrode

DO2 Indicating Controller with Electrode

Send Message

DO2 Instruments.

Transmitter with Electrode

DO2 Transmitter with Electrode

Send Message

DO2 Instruments.

Indicator with Electrode

A DO₂ indicator with an electrode refers to a device used to measure dissolved oxygen (DO₂) levels in a liquid, typically water. This is crucial in environmental monitoring, wastewater treatment, aquaculture, and laboratory experiments. The term 'electrode' here implies that the device operates using electrochemical principles, commonly through a galvanic or polarographic sensor.

Send Message

Vibration Instruments-Switches

Vibration Switches Weatherproof

Vibration Switches with options as Manual Reset type and Remote Reset type. Enclosure : Sealed Ingress Protection to IP 67 to BS EN60947-1 Material : Die-Cast Zinc alloy, Mazak III Finish : Chromate Passivation with Polyester Point (Grey) Set level range : 0.5 to 9g Peak acceleration Contact Rating with Silver Contacts : 5 A 240 VAC (non-inductive) SPCO 3 A 30 VDC (non-inductive) up to 1 million operations 4 A 240 VAC per contact for D Pole Versions In case of Gold Contacts : 0.5 A 30 VDC max for 1.S. Currents Contact Arrangements : SPCO or, DPCO Temperature range : -55 to +85°C Electrical Reset : Manual and Remote

Send Message

Vibration Instruments-Switches

Vibration Switch Exproof version 3171E Ex

Enclosure : Sealed Ingress Protection to IP 67 to BS EN60947-1 and Flameproof to group IIA/IIB CCOE Certified Material : Die-Cast Zinc alloy, Mazak III Finish : Chromate Passivation with Polyester Point (Grey) Set level range : 0.5 to 9g Peak acceleration Contact Rating with Silver Contacts : 5 A 240 VAC (non-inductive) SPCO 3 A 30 VDC (non-inductive) up to 1 million operations 4 A 240 VAC per contact for D Pole Versions In case of Gold Contacts : 0.5 A 30 VDC max for 1.S. Currents Contact Arrangements : SPCO or, DPCO Temperature range : -55 to +85°C Electrical Reset : Manual

Send Message

Tailor made Instruments- Control Panels

Control Panel for Level Control in Overhead Tank

We design & manufacture the Control Panels as per Process requirements. As we manufacture Customized Controllers also, we can provide the Control panels along with Digital Process Indicators & Controllers or, also with PLC & Scada. These Panels are normally made in MS with Powder coating, but we can provide in SS and Flameproof enclosures also. Enclosure type : IP 52, IP 54, IP 65 or, Flameproof