'magnetic key'

We have Electro Magnetic Flow Meters, which has Digital Readout for Flow Rate as well as Total Flow. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Meters is, the fluid passing through it must be conductive, The conductivity of the liquid must be at least 0.5 µS/Cm. These meters are also called as Magflow or, EM Flow Meters. These meters has no any moving parts in it, so these very well recommended for food grade applications like juices, milk, Municipal or, Industrial Water, etc. Because there are no moving parts in it, these meters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc. Electromagnetic Flow Meters are available in three types on the basis of their construction. : Full Bore type Electromagnetic Flow Meters, Sandwich type Electromagnetic Flow Meters and Insertion type Electromagnetic Flow Meters. Insertion type Electromagnetic Flow Meters are provided along with Hot Tab Assembly for the safty in use, ease in installation and ease in maintenance. These type of meters requires very low maintenance. Meter Sizes : DN 10 up to DN 2000 End Connections : Flanged Ends, Tri-Clover Ends, SMS type or, Wafer type. Outer Body Materials : MS or, SS Liner Materials : Soft or, Hard Rubber, PTFE, PFA or, Neoprene Electrode Material : Hastelloy C or, B, Titanium Velocity suitability : 0.5 up to 10 M/Sec.

We have Electro Magnetic Flow Transmitters, which has Digital Readout for Flow Rate and Totalized Flow along with the output of 4 to 20 mA in proportionate to the Flow Rate. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Transmitter is, the medium must have conductivity at least 0.5 µS/Cm. These Flow Transmitters are also called as Magflow or, EM Flow Transmitters. Electromagnetic Flow Transmitters has no any moving parts in it, so these very well recommended for food grade applications like juices, milk, Municipal or, Industrial Water, etc. Because there are no moving parts in it, these Transmitters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc. Electromagnetic Flow Transmitters are available in three types on the basis of their construction. : Full Bore type Electromagnetic Flow Transmitters, Sandwich type Electromagnetic Flow Transmitters and Insertion type Electromagnetic Flow Transmitters. Insertion type Electromagnetic Flow Meters are provided along with Hot Tab Assembly for the safety in use, ease in installation and ease in maintenance. These type of meters requires very low maintenance. Meter Sizes : DN 10 up to DN 2000 End Connections : Flanged Ends, Tri-Clover Ends, SMS type or, Wafer type. Outer Body Materials : MS or, SS Liner Materials : Soft or, Hard Rubber, PTFE, PFA or, Neoprene Electrode Material : Hastelloy C or, B, Titanium Velocity suitability : 0.5 up to 10 M/Sec.

Follower Capsule type Level Gauges are suitable for Non-Magnetic Fluids only. The follower is actuated by a magnetic float, which moves with the liquid level in the tank. MOC of Float : SS 316 or, specific on request Level Indication : can be min 300 mm up to 1500 mm. (or, special as per client''s requirement) Display type : Continuous level indication by Red colored follower magnet Level Indicating Scale : one no. Aluminum Scale of 25 mm width with 10 mm intervals Mounting : From side of the tank using the Bypass assembly or, on the top of the tank. Reed Switches : Externally settable Reed Switches can be provided with DIN plug or, in Flameproof housings

We have very commonly used two types of Magnetic Level Gauge in our range - Follower Capsule type and Bi-color type. These Magnetic Gauges are installed outside of a vessel or tank either on the top of the tank or, on the side. The liquid level in the tank can easily be observed from the change of the flag color or, follower type magnet. Optional devices of magnetic switch and level transducer can be added for electrical signal output and level transmitting. Process Connection : Flanged or, Screwed Range : 300 mm up to 3500 mm Construction of guide pipe : SS or, PP Specific Gravity of Liquid : min. 0.7

We have Diaphragm operated Differential Pressure Gauges which do not have any bourden tube in it. These DP Gauges works on Magnetic Coupling principle. These gauges are suitable for Non-Magnetic Fluids only and more in demand for DP Measurement applications in HVAC / across Heat Exchangers / across Pumps / across Filters / across Strainers, Level Measurement in pressurized tanks, Flow Rate indication across Orifice plate etc. Ranges : Various DP ranges from 15 mm Wc up to 7 bar We can also offer Compound ranges. Sizes : Diaphragm & Piston type Gauges are available in options like 2 1/2”, 3 1/2”, 4”, 4 1/2”, 6” dia. Battery operated Digital DP Gauges are available in 4" dia. External powered Digital DP Gauges are available in Panel mounted or, Wall mounted versions. Connection : 1/4” NPT-F (Standard) Accuracy : + / - 2% FSD (Ascending) Working Pressure : Various options up to 400 bar Porting : Options like In – Line. Back or, Bottom Calibration : Non-Linear, spread over 65 degrees to 75 degrees Arc. Sensing Element : Small Convoluted Diaphragm Wetted parts : Aluminium, Brass, SS 316, Inductrial Plastic, Buna N, Viton Max. Working Temp.: with Buna N as sealants Max. 60 degree C & with Viton max. 200 degree C.. Enclosure : IP 65 Certification : CE Single or, Duel Reed Switch Contacts can be provided along with the Gauge, either in IP65 or, Flameproof enclosure.

We have Diaphragm operated Differential Pressure Gauges which do not have any bourden tube in it. These DP Gauges works on Magnetic Coupling principle. These gauges are suitable for Non-Magnetic Fluids only and more in demand for DP Measurement applications in HVAC / across Heat Exchangers / across Pumps / across Filters / across Strainers, Level Measurement in pressurized tanks, Flow Rate indication across Orifice plate etc. Ranges : Various DP ranges from 15 mm Wc up to 7 bar We can also offer Compound ranges. Sizes : Diaphragm & Piston type Gauges are available in options like 2 1/2”, 3 1/2”, 4”, 4 1/2”, 6” dia. Battery operated Digital DP Gauges are available in 4" dia. External powered Digital DP Gauges are available in Panel mounted or, Wall mounted versions. Connection : 1/4” NPT-F (Standard) Accuracy : + / - 2% FSD (Ascending) Working Pressure : Various options up to 400 bar Porting : Options like In – Line. Back or, Bottom Calibration : Non-Linear, spread over 65 degrees to 75 degrees Arc. Sensing Element : Small Convoluted Diaphragm Wetted parts : Aluminium, Brass, SS 316, Inductrial Plastic, Buna N, Viton Max. Working Temp.: with Buna N as sealants Max. 60 degree C & with Viton max. 200 degree C.. Enclosure : IP 65 Certification : CE Single or, Duel Reed Switch Contacts can be provided along with the Gauge, either in IP65 or, Flameproof enclosure.

We have Diaphragm operated Differential Pressure Gauges which do not have any bourden tube in it. These DP Gauges works on Magnetic Coupling principle. These gauges are suitable for Non-Magnetic Fluids only and more in demand for DP Measurement applications in HVAC / across Heat Exchangers / across Pumps / across Filters / across Strainers, Level Measurement in pressurized tanks, Flow Rate indication across Orifice plate etc. Ranges : Various DP ranges from 15 mm Wc up to 7 bar We can also offer Compound ranges. Sizes : Diaphragm & Piston type Gauges are available in options like 2 1/2”, 3 1/2”, 4”, 4 1/2”, 6” dia. Battery operated Digital DP Gauges are available in 4" dia. External powered Digital DP Gauges are available in Panel mounted or, Wall mounted versions. Connection : 1/4” NPT-F (Standard) Accuracy : + / - 2% FSD (Ascending) Working Pressure : Various options up to 400 bar Porting : Options like In – Line. Back or, Bottom Calibration : Non-Linear, spread over 65 degrees to 75 degrees Arc. Sensing Element : Small Convoluted Diaphragm Wetted parts : Aluminium, Brass, SS 316, Inductrial Plastic, Buna N, Viton Max. Working Temp.: with Buna N as sealants Max. 60 degree C & with Viton max. 200 degree C.. Enclosure : IP 65 Certification : CE Single or, Duel Reed Switch Contacts can be provided along with the Gauge, either in IP65 or, Flameproof enclosure.

We have Diaphragm operated Differential Pressure Gauges which do not have any bourden tube in it. These DP Gauges works on Magnetic Coupling principle. These gauges are suitable for Non-Magnetic Fluids only and more in demand for DP Measurement applications in HVAC / across Heat Exchangers / across Pumps / across Filters / across Strainers, Level Measurement in pressurized tanks, Flow Rate indication across Orifice plate etc. Ranges : Various DP ranges from 15 mm Wc up to 7 bar We can also offer Compound ranges. Sizes : Diaphragm & Piston type Gauges are available in options like 2 1/2”, 3 1/2”, 4”, 4 1/2”, 6” dia. Battery operated Digital DP Gauges are available in 4" dia. External powered Digital DP Gauges are available in Panel mounted or, Wall mounted versions. Connection : 1/4” NPT-F (Standard) Accuracy : + / - 2% FSD (Ascending) Working Pressure : Various options up to 400 bar Porting : Options like In – Line. Back or, Bottom Calibration : Non-Linear, spread over 65 degrees to 75 degrees Arc. Sensing Element : Small Convoluted Diaphragm Wetted parts : Aluminium, Brass, SS 316, Inductrial Plastic, Buna N, Viton Max. Working Temp.: with Buna N as sealants Max. 60 degree C & with Viton max. 200 degree C.. Enclosure : IP 65 Certification : CE Single or, Duel Reed Switch Contacts can be provided along with the Gauge, either in IP65 or, Flameproof enclosure.

We have Diaphragm operated Differential Pressure Gauges which do not have any bourden tube in it. These DP Gauges works on Magnetic Coupling principle. These gauges are suitable for Non-Magnetic Fluids only and more in demand for DP Measurement applications in HVAC / across Heat Exchangers / across Pumps / across Filters / across Strainers, Level Measurement in pressurized tanks, Flow Rate indication across Orifice plate etc. Ranges : Various DP ranges from 15 mm Wc up to 7 bar We can also offer Compound ranges. Sizes : Diaphragm & Piston type Gauges are available in options like 2 1/2”, 3 1/2”, 4”, 4 1/2”, 6” dia. Battery operated Digital DP Gauges are available in 4" dia. External powered Digital DP Gauges are available in Panel mounted or, Wall mounted versions. Connection : 1/4” NPT-F (Standard) Accuracy : + / - 2% FSD (Ascending) Working Pressure : Various options up to 400 bar Porting : Options like In – Line. Back or, Bottom Calibration : Non-Linear, spread over 65 degrees to 75 degrees Arc. Sensing Element : Small Convoluted Diaphragm Wetted parts : Aluminium, Brass, SS 316, Inductrial Plastic, Buna N, Viton Max. Working Temp.: with Buna N as sealants Max. 60 degree C & with Viton max. 200 degree C.. Enclosure : IP 65 Certification : CE Single or, Duel Reed Switch Contacts can be provided along with the Gauge, either in IP65 or, Flameproof enclosure.