'industrial applications'

We have a very accurate and most reliable Pointer type Flow Gauge in our range. Its used in industrial applications to know the flow passing through the pipe line. Because of its smaller least counts and better accuracy, these are used very commonly for the applications where the meter should work without any power supply. This Dial type Flow Gauge has no any gears in its construction and so it doesn't require much maintenance also.

We have Electro Magnetic Flow Meters, which has Digital Readout for Flow Rate as well as Total Flow. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Meters is, the fluid passing through it must be conductive, The conductivity of the liquid must be at least 0.5 µS/Cm. These meters are also called as Magflow or, EM Flow Meters. These meters has no any moving parts in it, so these very well recommended for food grade applications like juices, milk, Municipal or, Industrial Water, etc. Because there are no moving parts in it, these meters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc. Electromagnetic Flow Meters are available in three types on the basis of their construction. : Full Bore type Electromagnetic Flow Meters, Sandwich type Electromagnetic Flow Meters and Insertion type Electromagnetic Flow Meters. Insertion type Electromagnetic Flow Meters are provided along with Hot Tab Assembly for the safty in use, ease in installation and ease in maintenance. These type of meters requires very low maintenance. Meter Sizes : DN 10 up to DN 2000 End Connections : Flanged Ends, Tri-Clover Ends, SMS type or, Wafer type. Outer Body Materials : MS or, SS Liner Materials : Soft or, Hard Rubber, PTFE, PFA or, Neoprene Electrode Material : Hastelloy C or, B, Titanium Velocity suitability : 0.5 up to 10 M/Sec.

We have Electro Magnetic Flow Transmitters, which has Digital Readout for Flow Rate and Totalized Flow along with the output of 4 to 20 mA in proportionate to the Flow Rate. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Transmitter is, the medium must have conductivity at least 0.5 µS/Cm. These Flow Transmitters are also called as Magflow or, EM Flow Transmitters. Electromagnetic Flow Transmitters has no any moving parts in it, so these very well recommended for food grade applications like juices, milk, Municipal or, Industrial Water, etc. Because there are no moving parts in it, these Transmitters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc. Electromagnetic Flow Transmitters are available in three types on the basis of their construction. : Full Bore type Electromagnetic Flow Transmitters, Sandwich type Electromagnetic Flow Transmitters and Insertion type Electromagnetic Flow Transmitters. Insertion type Electromagnetic Flow Meters are provided along with Hot Tab Assembly for the safety in use, ease in installation and ease in maintenance. These type of meters requires very low maintenance. Meter Sizes : DN 10 up to DN 2000 End Connections : Flanged Ends, Tri-Clover Ends, SMS type or, Wafer type. Outer Body Materials : MS or, SS Liner Materials : Soft or, Hard Rubber, PTFE, PFA or, Neoprene Electrode Material : Hastelloy C or, B, Titanium Velocity suitability : 0.5 up to 10 M/Sec.

We manufacture Site Glass type Level Gauges. These are used for various industrial applications where the level of the medium inside of the tank can be easily viewed from outside of tech tank. Site Glass type Level Gauges are very economical.

The TDS Electrode with TC (Threaded Connection) End is a specific type of electrode that features a threaded connector, typically designed for easy installation and secure connection to measurement systems or controllers. This type of electrode is commonly used in industrial, laboratory, and water treatment applications where a reliable and easy-to-install sensor is required for TDS measurement.

We have various type of DP Transmitters. DP Transmitters are very commonly used in Industrial applications like DP measurement across Filters, DP Measurement across Strainers, for Level measurement in Pressurized Tanks and also for Flow Measurement through Orifice Plates. DP Transmitters are available in Blind type and with Digital Indication.

We have Differential Pressure Gauge with Switches, which are useful in industrial applications like Automatic cleaning systems for Heat Exchangers and various type of expensive Filters. We have few options in the same : Differential Pressure Gauge with one Switch, Differential Pressure Gauge with Duel Switches or, Differential Pressure Gauge with Flameproof Switching contacts. The type of Differential Pressure Gauge with Switches are : Piston type DP Gauge with Switch - These are offered when medium in both the ports are same and slight migration is acceptable. Diaphragm type DP Gauge with Switch - These are recommended where migration of mediums in two ports in not acceptable. & Digital DP Gauge with Switch (Digital DP Indicator with Swicthing contacts) - For high accuracy applications these are recommended..

We have Differential Pressure Gauge with Switches, which are useful in industrial applications like Automatic cleaning systems for Heat Exchangers and various type of expensive Filters. We have few options in the same : Differential Pressure Gauge with one Switch, Differential Pressure Gauge with Duel Switches or, Differential Pressure Gauge with Flameproof Switching contacts. The type of Differential Pressure Gauge with Switches are : Piston type DP Gauge with Switch - These are offered when medium in both the ports are same and slight migration is acceptable. Diaphragm type DP Gauge with Switch - These are recommended where migration of mediums in two ports in not acceptable. & Digital DP Gauge with Switch (Digital DP Indicator with Swicthing contacts) - For high accuracy applications these are recommended..

We have Differential Pressure Gauge with Switches, which are useful in industrial applications like Automatic cleaning systems for Heat Exchangers and various type of expensive Filters. We have few options in the same : Differential Pressure Gauge with one Switch, Differential Pressure Gauge with Duel Switches or, Differential Pressure Gauge with Flameproof Switching contacts. The type of Differential Pressure Gauge with Switches are : Piston type DP Gauge with Switch - These are offered when medium in both the ports are same and slight migration is acceptable. Diaphragm type DP Gauge with Switch - These are recommended where migration of mediums in two ports in not acceptable. & Digital DP Gauge with Switch (Digital DP Indicator with Swicthing contacts) - For high accuracy applications these are recommended..