'food production processes'

ORP Indicating Transmitter with Electrode ORP indicating transmitters with electrodes are used to measure the redox potential (ORP) of a solution, which is a measure of its ability to act as an oxidizing or reducing agent. ORP transmitters can be used in a variety of industrial applications, including: Drinking water and swimming pools, Wastewater treatment plants, Electroplating baths, Flue gas scrubbing, and Food production processes.

An ORP (Oxidation-Reduction Potential) Indicating Transmitter with Electrode is a device used to measure and display the oxidation-reduction potential in a solution. These systems are commonly used in water treatment, chemical processing, swimming pools, food/beverage production, and any application where monitoring the redox balance is important.

DO2 Indicator: A DO2 indicator, also known as a Dissolved Oxygen Indicator or Oxygen Saturation Indicator, measures the dissolved oxygen levels in a solution, typically in water or wastewater treatment processes. What does it measure? DO2 indicators measure: 1. Dissolved Oxygen (DO) levels: The amount of oxygen dissolved in water. 2. Oxygen Saturation: The percentage of dissolved oxygen relative to the maximum possible concentration. Types of DO2 Indicators: 1. Electrochemical sensors 2. Optical sensors (e.g., luminescent or fluorescence-based) 3. Membrane-covered probes Applications: 1. Water treatment plants 2. Wastewater treatment plants 3. Aquaculture and fish farming 4. Industrial processes (e.g., chemical, food, and beverage) 5. Environmental monitoring Importance: Accurate DO2 measurement ensures: 1. Efficient treatment processes 2. Optimal water quality 3. Compliance with regulatory standards 4. Prevention of corrosion and scaling 5. Healthy aquatic ecosystems Common DO2 Indicator Parameters: 1. Measurement range: 0-20 mg/L (milligrams per liter) 2. Accuracy: ±0.1-0.5 mg/L 3. Resolution: 0.01-0.1 mg/L 4. Response time: seconds to minutes Examples of DO2 Indicators: 1. Hach DO200 2. YSI ProDSS 3. Thermo Scientific Orion DO6 4. Mettler Toledo OptiO2 Factors Affecting DO2 Readings: 1. Temperature 2. Pressure 3. Salinity 4. Turbidity 5. Interfering substances (e.g., sulfides, chlorides)

This model focuses on producing Type II (Analytical Grade) water, adhering to ASTM D1193 and ISO 3696 standards.​ Key Features: Production Capacity: 3, 5, or 10 liters per hour​ Purification Process: Sequential stages including sediment filtration, dechlorination, reverse osmosis, and deionization​ Fresh Water Dispensing: Delivers freshly produced Type II water without storage to prevent quality degradation​ Additional Supply: Can provide osmotic water to equipment like thermo-disinfectors and autoclaves

Batchers for liquids is used in various process industries for batch processes. When a same quantity of liquid has to be fed in the process vessel repeatedly, BATCHER is the perfect instrument. By using BATCHER, you get correct quantity of liquid in very short time, reduces human dependency, avoids chances of spillage of liquid during manual handling process. So, using our Batching System you save your man power, time and you also get better accuracy – which improves the productivity and profits of that company. We also have batchers which are used at Civil Construction sites for Concrete Mixers (Ready Mix Cement Plants). We have two models in Portable Liquid Dispensers. Both are compact dispensing solution for Water as well as Fuels at construction and mining sites. A tamper-proof metering unit makes it a very attractive device for conserving precious diesel fuel and controlling pilferage on construction/mining sites. Accuracy : ± 0.5% or, 1% Supply Voltage to system : 24 V DC or, 230 V AC Display : Self Powered Display a)Reset Batch - 999.99 Liters 12mm Height LCD b)Cumulative Totaliser - 99999999 Liters 8mm Height LCD Batch quantity to be dispensed : field settable Source of liquid supply : from the storage tank

We have Electro Magnetic Flow Meters, which has Digital Readout for Flow Rate as well as Total Flow. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Meters is, the fluid passing through it must be conductive, The conductivity of the liquid must be at least 0.5 µS/Cm. These meters are also called as Magflow or, EM Flow Meters. These meters has no any moving parts in it, so these very well recommended for food grade applications like juices, milk, Municipal or, Industrial Water, etc. Because there are no moving parts in it, these meters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc. Electromagnetic Flow Meters are available in three types on the basis of their construction. : Full Bore type Electromagnetic Flow Meters, Sandwich type Electromagnetic Flow Meters and Insertion type Electromagnetic Flow Meters. Insertion type Electromagnetic Flow Meters are provided along with Hot Tab Assembly for the safty in use, ease in installation and ease in maintenance. These type of meters requires very low maintenance. Meter Sizes : DN 10 up to DN 2000 End Connections : Flanged Ends, Tri-Clover Ends, SMS type or, Wafer type. Outer Body Materials : MS or, SS Liner Materials : Soft or, Hard Rubber, PTFE, PFA or, Neoprene Electrode Material : Hastelloy C or, B, Titanium Velocity suitability : 0.5 up to 10 M/Sec.

We have Electro Magnetic Flow Transmitters, which has Digital Readout for Flow Rate and Totalized Flow along with the output of 4 to 20 mA in proportionate to the Flow Rate. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Transmitter is, the medium must have conductivity at least 0.5 µS/Cm. These Flow Transmitters are also called as Magflow or, EM Flow Transmitters. Electromagnetic Flow Transmitters has no any moving parts in it, so these very well recommended for food grade applications like juices, milk, Municipal or, Industrial Water, etc. Because there are no moving parts in it, these Transmitters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc. Electromagnetic Flow Transmitters are available in three types on the basis of their construction. : Full Bore type Electromagnetic Flow Transmitters, Sandwich type Electromagnetic Flow Transmitters and Insertion type Electromagnetic Flow Transmitters. Insertion type Electromagnetic Flow Meters are provided along with Hot Tab Assembly for the safety in use, ease in installation and ease in maintenance. These type of meters requires very low maintenance. Meter Sizes : DN 10 up to DN 2000 End Connections : Flanged Ends, Tri-Clover Ends, SMS type or, Wafer type. Outer Body Materials : MS or, SS Liner Materials : Soft or, Hard Rubber, PTFE, PFA or, Neoprene Electrode Material : Hastelloy C or, B, Titanium Velocity suitability : 0.5 up to 10 M/Sec.

An ORP Indicating Controller with Electrode is an advanced device used not just to measure Oxidation-Reduction Potential (ORP), but also to control processes based on that measurement. It’s essentially the next step up from a transmitter—it includes built-in control logic for automated chemical dosing, alarms, or process adjustments.

For Industrial processes, various type of Mechanical Level Gauges are required. On the basis of applications, suitable Mechanical Level Guages can be selected. These Level Gauges also known as Mechanical Level Gauges or, Mechanical Tank Level Gauges. Type of Level Gauges in our range are as listed below: 1) Tubular Level Gauges 2) Reflex Level Gauges 3) Pointer type Mechanical Level Gauge 4) Mechanical Level Gauge 5) Bi-color Level gauges