We have various type of Pressure Transmitters, which would be selected on the basis of application, details of medium and its max. pressure and Temperature. The basic use of Pressure Transmitter is to Sense the pressure in the process and to give its proportionate output to the device which will either indicate the values in Pressure Terms or it will give some Controlled Output. We have a very common Miniature Pressure Transmitters, Miniature Transmitters with integral Digital Display, Miniature Pressure Transmitter with Integral Bar Graph Display, Pressure Transmitters with integral LCD display, Smart Pressure Transmitters etc. All these transmitters can be provided as Flush Diaphragm type Pressure Transmitter, Pressure Transmitter with Triclover connection, Pressure Transmitter with Remote Diaphragm Seal, Pressure Transmitter with Flange connection, Pressure Transmitter in Flameproof version etc.

We have Vacuum Sensors and Switches for Indication & Control applications. Vacuum Switches & Compound Range Switches are normally used in Vacuum Pumps or, Vacuum based systems where you have to ensure availability of Vacuum within Low & High set limits. So using Vacuum Switches you can control your process in On-Off mode. Vacuum Transmitters are used to know actual availability of Vacuum in the process and the same can be used to read or, control in proportionate or, On-Off mode. Flameproof Vacuum Switch is designed as per IS2148 for Gas Gr. IIC Flameproof - CE Certification and approved by a leading European Lab – “BASEEFA” for ATEX & ICEEX certificates Adjustable Range : 760 to 100 mm Hg Vacuum Diaphragm : Teflon or, Neoprene Pressure Housing MOC : Aluminium, Brass or, SS 316

We have Preset Batching Systems using Positive Displacement Flow meter or, Insertion Paddle Wheel type Flow Meter. Batcher with PD meter has high accuracy almost 0.5% of the batch quantity, but those would not be portable. These type of Batchers are recommended fro high value fuels, Solvents and oils. The Batcher with Insertion Paddel Wheel Sensor type Meter has accuracy of 1% of the batch quantity, and those can be Portable as well as stationary - depending up on the capacity. Both systems can also be provided in Flameproof housings and SS 316 contcat parts. Batching Systems are designed for dispensing exact preset quantities of liquids to reactors, storage tanks, batch reactor vessels as well as at Civil Construction sites for Concrete Mixers (Ready Mix Cement Plants).

Type of sensor : Insertion Paddle Wheel Service : Any clear liquids Max. % of Solids : 1% of fluid volume, non-abrasive, non-magnetic,<100 micron in dia.& length Mounted : Field Pressure drop : Less than 0.1 bar Accuracy : +/- 1% of Full Scale if velocity is more than 0.5 m/s Repeatability : +/- 0.5% Enclosure : IP 65 or, Flameproof Fitting material : ABS, SS304 or, SS316 Fitting Type : T type Welded Flanged ends Sensor Cable Length : 0.5 meters signal transmission cable Output Cable Length : Two core shielded wire - One Meter Paddle : PVDF Indicator Housing : Polycarbonate O-rings : Viton Sensor Rod : PP or, SS 316 Display : 8 X 2 alpha-numeric (Backlit) 7 digits for Total & 4 digits for rate Unit for indication : LPM, LPH, M3/Hr, USGPM Out Put : 4 to 20 mA Supply : 230 V AC +/- 15%, 50 Hz T Fitting : It is compulsory with PP or, SS Flow Sensors (Selection from TYPE OF T-FITTINGS) Line Size Selection (Water) : Min. & Max. Flow Rates NB MINIMUM M3/HR MAXIMUM M3/HR 15 0.2 2.1 25 0.8 8 40 1.9 19 50 3.5 35 65 5.8 58 80 7.5 75 100 14 140 125: 5' 22 220 150: 6' 32 320 175: 7' 45 450 200: 8' 56 560 225: 9' 71 710 250: 10' 88 880 275: 11' 106 1060 300:12' 126 1260 325:13' 148 1480 350:14' 172 1720 375:15' 197 1970 400:16' 224 2240

Follower Capsule type Level Gauges are suitable for Non-Magnetic Fluids only. The follower is actuated by a magnetic float, which moves with the liquid level in the tank. MOC of Float : SS 316 or, specific on request Level Indication : can be min 300 mm up to 1500 mm. (or, special as per client''s requirement) Display type : Continuous level indication by Red colored follower magnet Level Indicating Scale : one no. Aluminum Scale of 25 mm width with 10 mm intervals Mounting : From side of the tank using the Bypass assembly or, on the top of the tank. Reed Switches : Externally settable Reed Switches can be provided with DIN plug or, in Flameproof housings

Follower Capsule type Level Gauges are suitable for Non-Magnetic Fluids only. The follower is actuated by a magnetic float, which moves with the liquid level in the tank. MOC of Float : SS 316 or, specific on request Level Indication : can be min 300 mm up to 1500 mm. (or, special as per client''s requirement) Display type : Continuous level indication by Red colored follower magnet Level Indicating Scale : one no. Aluminum Scale of 25 mm width with 10 mm intervals Mounting : From side of the tank using the Bypass assembly or, on the top of the tank. Reed Switches : Externally settable Reed Switches can be provided with DIN plug or, in Flameproof housings (max. up to 4 nos.)

Follower Capsule type Level Gauges are suitable for Non-Magnetic Fluids only. The follower is actuated by a magnetic float, which moves with the liquid level in the tank. MOC of Float : SS 316 or, specific on request Level Indication : can be min 300 mm up to 1500 mm. (or, special as per client''s requirement) Display type : Continuous level indication by Red colored follower magnet Level Indicating Scale : one no. Aluminum Scale of 25 mm width with 10 mm intervals Mounting : From side of the tank using the Bypass assembly or, on the top of the tank. Reed Switches : Externally settable Reed Switches can be provided with DIN plug or, in Flameproof housings (max. up to 4 nos.)

Follower Capsule type Level Gauges are suitable for Non-Magnetic Fluids only. The follower is actuated by a magnetic float, which moves with the liquid level in the tank. MOC of Float : SS 316 or, specific on request Level Indication : can be min 300 mm up to 1500 mm. (or, special as per client''s requirement) Display type : Continuous level indication by Red colored follower magnet Level Indicating Scale : one no. Aluminum Scale of 25 mm width with 10 mm intervals Mounting : From side of the tank using the Bypass assembly or, on the top of the tank. Reed Switches : Externally settable Reed Switches can be provided with DIN plug or, in Flameproof housings

We provide Process Indicators and Process Indicating Controllers as per the clients demand & the process needs. Input can be 4 to 20 mA, 0 to 10 V or, pulses, resistance etc. Output can be Potential Free Contacts (Single / Two or, Four nos.) or, Re-transmitter etc. Display will be LED 7 segment or, LCD Power Supply can be 230 V AC, 110 V AC, 24 V DC or, 12 V DC Mounting types can be Panel mounted, Wall Mounted or, Field mounted Enclosure types can be IP 40, IP 54, IP 65 or, Flameproof