'20 ma'

We have Diaphragm operated Differential Pressure Gauges which do not have any bourden tube in it. These DP Gauges works on Magnetic Coupling principle. These gauges are suitable for Non-Magnetic Fluids only and more in demand for DP Measurement applications in HVAC / across Heat Exchangers / across Pumps / across Filters / across Strainers, Level Measurement in pressurized tanks, Flow Rate indication across Orifice plate etc. Ranges : Various DP ranges from 15 mm Wc up to 7 bar We can also offer Compound ranges. Sizes : Diaphragm & Piston type Gauges are available in options like 2 1/2”, 3 1/2”, 4”, 4 1/2”, 6” dia. Battery operated Digital DP Gauges are available in 4" dia. External powered Digital DP Gauges are available in Panel mounted or, Wall mounted versions. Connection : 1/4” NPT-F (Standard) Accuracy : + / - 2% FSD (Ascending) Working Pressure : Various options up to 400 bar Porting : Options like In – Line. Back or, Bottom Calibration : Non-Linear, spread over 65 degrees to 75 degrees Arc. Sensing Element : Small Convoluted Diaphragm Wetted parts : Aluminium, Brass, SS 316, Inductrial Plastic, Buna N, Viton Max. Working Temp.: with Buna N as sealants Max. 60 degree C & with Viton max. 200 degree C.. Enclosure : IP 65 Certification : CE Single or, Duel Reed Switch Contacts can be provided along with the Gauge, either in IP65 or, Flameproof enclosure.

Digital Indicating type Pressure Transmitters senses the pressure in the process, displays the measured value in Digital indicator and gives the output in current or, voltage with proportion to the input pressure. Indication : with (Integrated or, Remote display) Output options : 4 to 20 mA, 0 to 10 Vdc Accuracy : +/- 0.1%, 0.2%, 0.25%, 0.4% or, 0.5% of FS Enclosure type : IP 65, IP 67, IP 68, Ex-proof Ranges : various ranges from 0 to 100 mbar up to 0 to 700 bar Max. pressure : 1.5 Times of Working Pressure. Operating TEMP. : 0 to 60, 0 to 90°C Process connections : 1/4' or, ½” BSP-M, Flush Diaphragm, Triclamp, Homogenizer, SMS Zero and Span Adjustment : With or, Without (Using the suitable accessories we offer it for higher temperatures also)

We have Electro Magnetic Flow Meters, which has Digital Readout for Flow Rate as well as Total Flow. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Meters is, the fluid passing through it must be conductive, The conductivity of the liquid must be at least 0.5 µS/Cm. These meters are also called as Magflow or, EM Flow Meters. These meters has no any moving parts in it, so these very well recommended for food grade applications like juices, milk, Municipal or, Industrial Water, etc. Because there are no moving parts in it, these meters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc. Electromagnetic Flow Meters are available in three types on the basis of their construction. : Full Bore type Electromagnetic Flow Meters, Sandwich type Electromagnetic Flow Meters and Insertion type Electromagnetic Flow Meters. Insertion type Electromagnetic Flow Meters are provided along with Hot Tab Assembly for the safty in use, ease in installation and ease in maintenance. These type of meters requires very low maintenance. Meter Sizes : DN 10 up to DN 2000 End Connections : Flanged Ends, Tri-Clover Ends, SMS type or, Wafer type. Outer Body Materials : MS or, SS Liner Materials : Soft or, Hard Rubber, PTFE, PFA or, Neoprene Electrode Material : Hastelloy C or, B, Titanium Velocity suitability : 0.5 up to 10 M/Sec.

We have Indicating type Flow Switches which operates like Rota meter and it has a field settable switch, which will operate as soon as the flow passing through this switch is not within the set limits. Series : WFS series Service : Any free flowing liquid or gases Max. Particle size should not be more than 150 microns Mounting : Vertical or, Horizontal Process connection : 1/4', 3/8', 1/2' or, 1” Flow set point : single or, two nos. Field Settable Electrical connection : 500 mm long two core wire Wetted Parts : SS 304 / Brass & Polycarbonate, for 25 & 30 mm Borosilicate Glass instead of Polycarbonate Switch type : SPST (NO) Reed Switch (10 VA 230 VAC) Switch setting : Adjustable Repeatability : Better than +/- 1% Accuracy : +/-2.0 % Scale Tolerance : +/- 5% of Full Scale Max. Working Pressure : 10 bar Max. Working Temperature : 120 degree C

We have Electro Magnetic Flow Transmitters, which has Digital Readout for Flow Rate and Totalized Flow along with the output of 4 to 20 mA in proportionate to the Flow Rate. The Digital Indicator unit can be Field mounted or, Panel mounted. The very important point about Electro Magnetic type Flow Transmitter is, the medium must have conductivity at least 0.5 µS/Cm. These Flow Transmitters are also called as Magflow or, EM Flow Transmitters. Electromagnetic Flow Transmitters has no any moving parts in it, so these very well recommended for food grade applications like juices, milk, Municipal or, Industrial Water, etc. Because there are no moving parts in it, these Transmitters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc. Electromagnetic Flow Transmitters are available in three types on the basis of their construction. : Full Bore type Electromagnetic Flow Transmitters, Sandwich type Electromagnetic Flow Transmitters and Insertion type Electromagnetic Flow Transmitters. Insertion type Electromagnetic Flow Meters are provided along with Hot Tab Assembly for the safety in use, ease in installation and ease in maintenance. These type of meters requires very low maintenance. Meter Sizes : DN 10 up to DN 2000 End Connections : Flanged Ends, Tri-Clover Ends, SMS type or, Wafer type. Outer Body Materials : MS or, SS Liner Materials : Soft or, Hard Rubber, PTFE, PFA or, Neoprene Electrode Material : Hastelloy C or, B, Titanium Velocity suitability : 0.5 up to 10 M/Sec.

Magnetic coupling Piston type Differential Pressure Gauges (CE Certified model) These gauges are suitable for Non-Magnetic Fluids only. Model : 200 DPG Range : various ranges from 0.25 to 10 bar Dial Size : various options like 2”, 2 1/2”, 3 1/2”, 4”, 4 1/2”, 6” dia. Connection : 1/4” NPT - F (Optional BSP) Accuracy : + / - 2% FSD (Ascending) Working Pressure : High static pressure - 100 Kg/cm2 Porting : Options like - In–Line, Back or, Bottom Calibration : Non-Linear, spread over 65 degrees to 75 degrees Arc. Sensing Element : Piston Wetted parts : Aluminium, Brass, SS 316, Buna N, Viton Max. Working Temp.: Max. 80 degree C if Buna N is used, it can be max. 200 degree C if Viton is used. Enclosure : IP 65 Singe or, Duel Reed Switch Contacts can be provided along with DP Gauge, either in IP 65 or, in Flameproof enclosure

We have Diaphragm operated Differential Pressure Gauges which do not have any bourden tube in it. These DP Gauges works on Magnetic Coupling principle. These gauges are suitable for Non-Magnetic Fluids only and more in demand for DP Measurement applications in HVAC / across Heat Exchangers / across Pumps / across Filters / across Strainers, Level Measurement in pressurized tanks, Flow Rate indication across Orifice plate etc. Ranges : Various DP ranges from 15 mm Wc up to 7 bar We can also offer Compound ranges. Sizes : Diaphragm & Piston type Gauges are available in options like 2 1/2”, 3 1/2”, 4”, 4 1/2”, 6” dia. Battery operated Digital DP Gauges are available in 4" dia. External powered Digital DP Gauges are available in Panel mounted or, Wall mounted versions. Connection : 1/4” NPT-F (Standard) Accuracy : + / - 2% FSD (Ascending) Working Pressure : Various options up to 400 bar Porting : Options like In – Line. Back or, Bottom Calibration : Non-Linear, spread over 65 degrees to 75 degrees Arc. Sensing Element : Small Convoluted Diaphragm Wetted parts : Aluminium, Brass, SS 316, Inductrial Plastic, Buna N, Viton Max. Working Temp.: with Buna N as sealants Max. 60 degree C & with Viton max. 200 degree C.. Enclosure : IP 65 Certification : CE Single or, Duel Reed Switch Contacts can be provided along with the Gauge, either in IP65 or, Flameproof enclosure.

We have Diaphragm operated Differential Pressure Gauges which do not have any bourden tube in it. These DP Gauges works on Magnetic Coupling principle. These gauges are suitable for Non-Magnetic Fluids only and more in demand for DP Measurement applications in HVAC / across Heat Exchangers / across Pumps / across Filters / across Strainers, Level Measurement in pressurized tanks, Flow Rate indication across Orifice plate etc. Ranges : Various DP ranges from 15 mm Wc up to 7 bar We can also offer Compound ranges. Sizes : Diaphragm & Piston type Gauges are available in options like 2 1/2”, 3 1/2”, 4”, 4 1/2”, 6” dia. Battery operated Digital DP Gauges are available in 4" dia. External powered Digital DP Gauges are available in Panel mounted or, Wall mounted versions. Connection : 1/4” NPT-F (Standard) Accuracy : + / - 2% FSD (Ascending) Working Pressure : Various options up to 400 bar Porting : Options like In – Line. Back or, Bottom Calibration : Non-Linear, spread over 65 degrees to 75 degrees Arc. Sensing Element : Small Convoluted Diaphragm Wetted parts : Aluminium, Brass, SS 316, Inductrial Plastic, Buna N, Viton Max. Working Temp.: with Buna N as sealants Max. 60 degree C & with Viton max. 200 degree C.. Enclosure : IP 65 Certification : CE Single or, Duel Reed Switch Contacts can be provided along with the Gauge, either in IP65 or, Flameproof enclosure.

We have Diaphragm operated Differential Pressure Gauges which do not have any bourden tube in it. These DP Gauges works on Magnetic Coupling principle. These gauges are suitable for Non-Magnetic Fluids only and more in demand for DP Measurement applications in HVAC / across Heat Exchangers / across Pumps / across Filters / across Strainers, Level Measurement in pressurized tanks, Flow Rate indication across Orifice plate etc. Ranges : Various DP ranges from 15 mm Wc up to 7 bar We can also offer Compound ranges. Sizes : Diaphragm & Piston type Gauges are available in options like 2 1/2”, 3 1/2”, 4”, 4 1/2”, 6” dia. Battery operated Digital DP Gauges are available in 4" dia. External powered Digital DP Gauges are available in Panel mounted or, Wall mounted versions. Connection : 1/4” NPT-F (Standard) Accuracy : + / - 2% FSD (Ascending) Working Pressure : Various options up to 400 bar Porting : Options like In – Line. Back or, Bottom Calibration : Non-Linear, spread over 65 degrees to 75 degrees Arc. Sensing Element : Small Convoluted Diaphragm Wetted parts : Aluminium, Brass, SS 316, Inductrial Plastic, Buna N, Viton Max. Working Temp.: with Buna N as sealants Max. 60 degree C & with Viton max. 200 degree C.. Enclosure : IP 65 Certification : CE Single or, Duel Reed Switch Contacts can be provided along with the Gauge, either in IP65 or, Flameproof enclosure.